VLX 80 Fixed / Picture Window

VLX 80 Fixed / Picture Window in Jacksonville, FL | Lightwell Windows Jacksonville

The VLX 80 Fixed / Picture Window is ViewLux’s maximally glazed aluminum frame built for one purpose: giving you the largest possible sheet of glass with the least visible frame. Homeowners across Jacksonville choose this window for living rooms that face the St. Johns River, kitchens overlooking screened lanais, and master suites where morning light matters. Lightwell Windows Jacksonville is an authorized installation partner for ViewLux, which means you get the product from a local team that measures, orders, installs, and stands behind it, all under one roof. Call (904) 914-3691 to talk about your project.

Call (904) 914-3691

Product Overview – VLX 80 Fixed / Picture Window

The VLX 80 is a stationary window. It doesn’t open, tilt, or slide, and that’s the point. Because there are no sashes, no tracks, and no moving parts, nearly the entire unit is glass. The aluminum frame measures just 1.97 inches in profile width, which disappears against the wall once installed. The result is what designers call a picture window: uninterrupted sightlines, floor-to-ceiling glazing, and a view that feels like a living mural rather than a window.

In Jacksonville, where the light is bright and the outdoor season runs long, fixed windows make particular sense. They cost less than operable units of the same size, they seal tighter, and they require no maintenance beyond occasional glass cleaning. The VLX 80’s aluminum construction resists the humidity and salt air that accelerate wear on wood and vinyl frames in coastal North Florida. We’ve installed these across San Marco, Riverside, Avondale, and the Beaches, and they hold up exceptionally well in every microclimate Jacksonville throws at them.

Buyers choose the VLX 80 series for three reasons. First, maximum glass area: a frame this narrow puts more light into the room than bulkier alternatives. Second, architectural flexibility: the unit spans up to 120 inches wide, which suits modern open-concept homes with wide wall sections. Third, longevity: powder-coated aluminum doesn’t rot, warp, or swell, even after years of Jacksonville’s summer-afternoon downpours and high-humidity mornings.

Technical Specifications

Here’s what the VLX 80 Fixed / Picture Window looks like on paper. These numbers come directly from the manufacturer’s published specifications for this series.

• Frame profile width: 1.97 inches, giving the window its slim sightline and maximum glass-to-frame ratio.
• Wall thickness: 0.079 inches of extruded aluminum, which balances weight with structural stiffness for wide spans.
• Maximum span: Up to 120 inches wide on a single fixed unit. That’s a 10-foot-wide glass wall without a center post, assuming the opening is engineered to support it.
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated, Gray Tint, Black Tint. Each changes the look, performance, and privacy level of the window.
• Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood. All are powder-coated or anodized for weather resistance.
• Glazing type: Fixed glazing, meaning the glass is set directly into the frame without a sash. Fewer moving parts, fewer leak paths.

Performance standards: Thermal break technology for NFRC-rated energy performance, AAMA 812 low-expansion foam sealant on all perimeter joints, and installation per AAMA 2400/2410 standards. Wind-load rated for local climate requirements. Impact-resistant laminated glass is available as a glass option for coastal Jacksonville applications.

Performance Features

Thermal Efficiency
The VLX 80 frame includes a thermal break, a non-conductive barrier between the interior and exterior aluminum profiles. This stops heat from conducting through the metal, which matters in Jacksonville where August afternoons push 95 degrees. Paired with Low-E glass, the unit carries NFRC energy ratings that help keep cooling bills in check from May through October.

Acoustic Performance
Fixed windows seal tighter than operable windows by design. No gaps around sashes means less sound penetration. Homeowners near I-95, JTB, or the rail corridor in San Marco notice the difference immediately. Laminated glass upgrades the noise reduction further, which we recommend for bedrooms facing arterial roads in Jacksonville’s established neighborhoods.

Airtightness & Weather Seal
A fixed frame has no moving joints, so there are no wear points where air leaks develop over time. Every perimeter joint gets AAMA 812 low-expansion foam sealant during installation. On the spec sheet this shows up as a strong air-infiltration rating. In practice, it means no drafts when the winter wind comes off the Atlantic.

Waterproofing
Jacksonville gets roughly 50 inches of rain a year, much of it in sudden afternoon storms. The VLX 80’s drainage design and perimeter sealing system are built for that. The frame channels any incidental moisture outward, and the AAMA 2400/2410 installation methods we use protect the rough opening so water never reaches the wall cavity.

Wind Resistance
The 0.079-inch wall thickness on the aluminum extrusion gives the VLX 80 stiffness that thinner residential frames lack. The unit is wind-load rated to meet Florida building code requirements for the Jacksonville area. For homes east of the Intracoastal, impact-resistant laminated glass provides additional storm protection and meets coastal code where applicable.

Security & Hardware
There’s no hardware on a VLX 80. Zero visible handles, latches, or hinges. That’s a security feature in itself: nothing to pry, nothing to jimmy. The glass is set deep into the frame, and the frame is anchored to the structure. For ground-floor installations in Jacksonville, we suggest laminated or tempered glass for added break resistance.

Color & Glass Options

The VLX 80 comes in six frame finishes. Premium Black is the most popular choice in Jacksonville’s modern and mid-century homes, where it creates sharp contrast against light stucco or white siding. Pure White blends into traditional interiors and reads clean against brick. Anodized Silver has a metallic, industrial feel that suits lofts and contemporary builds. Bronze and Champagne are warmer metallics that pair well with earthy exterior palettes, common in older Riverside and Ortega homes. Teak Wood is a wood-look powder coat that gives the durability of aluminum with the visual warmth of timber, without the maintenance wood demands in Florida’s climate.

Glass selection changes what the window does. Clear is the view-maximizing option. Low-E reflects solar heat while staying nearly invisible. Frosted gives privacy for bathrooms or street-facing walls without curtains. Tempered meets safety glazing code for windows near floors and doors. Laminated adds impact resistance and sound dampening. Gray Tint and Black Tint cut glare and solar heat gain, useful for west-facing walls in Jacksonville that catch brutal afternoon sun.

Installation by Lightwell Windows Jacksonville in Jacksonville

A good window installed poorly is still a bad window. That’s the honest truth of the window business, and it’s why we run our own installation crews instead of subcontracting. Every VLX 80 Fixed / Picture Window we install goes through the same disciplined process.

We start with a pre-install inspection of the rough opening. We check for water damage, rot, or structural issues in the framing before any new window goes in. Jacksonville homes built before the 2000s often have surprises hiding behind old window frames, and we’d rather catch them before the new unit is set.

Setting the window means exactly this: level, plumb, and square. We shim the frame precisely, anchor it to the structure, and verify equal reveal lines on all four sides. Then every perimeter joint gets AAMA 812 low-expansion foam sealant, applied to the exact bead size the standard calls for. The whole installation follows AAMA 2400/2410, the recognized benchmark for residential window installation, which means flashing, drainage, and sealing are all done in the proper sequence.

After the window is set and sealed, we run a water test on the exterior and inspect the interior for any sign of air movement. We clean the glass, remove all packaging, and walk the finished unit with you before considering the job done.

One thing Jacksonville homeowners should know: manufacturer warranties cover defects in the product, not errors in the installation. A window installed out of level, with improper flashing, or with the wrong sealant will fail regardless of how well it’s made. Lightwell Windows Jacksonville installs per factory requirements, which keeps your ViewLux warranty intact and the window performing the way it was engineered to.

Frequently Asked Questions – VLX 80 Fixed / Picture Window

What is the lead time for the VLX 80 Fixed / Picture Window?
Lead time on the VLX 80 typically runs 3 to 5 weeks from order confirmation, depending on glass type and finish. Custom sizes and laminated glass can add time. When we quote your project, we give you a written timeline before you sign anything. Call (904) 914-3691 and we’ll confirm current production schedules.

Does the VLX 80 qualify for energy tax credits?
The VLX 80 can qualify for federal energy tax credits when configured with qualifying Low-E glass that meets ENERGY STAR requirements for the Southern climate zone, which includes Jacksonville. The credit amount and eligibility change year to year, so we’ll give you the manufacturer’s performance documentation for your specific configuration and recommend you confirm current credit terms with your tax professional.

What warranty comes with the Fixed / Picture Window?
ViewLux provides a manufacturer warranty covering the frame and glass unit, and the details depend on the specific configuration you order. What we add is the installation workmanship, which we stand behind ourselves. The combination means you’re covered on both the product and the install. Ask us for warranty documentation during your estimate.

Can I customize the size of the VLX 80?
Yes. The VLX 80 is built to your rough opening dimensions, up to a 120-inch maximum width on a single unit. For wider wall sections, we can run multiple fixed units in a row, separated by slim mullions that keep the sightlines nearly uninterrupted. This is a common configuration for Jacksonville homes with wide living-room walls facing a backyard or water view.

How do I maintain aluminum frames?
Aluminum frames need almost nothing. Wash the powder-coated surface with mild soap and water twice a year, rinse the sill track area, and keep weep holes clear of debris. That’s the full maintenance program. In Jacksonville’s coastal zones, a quick rinse helps remove salt film that accumulates on exterior surfaces. No repainting, no sealing, no rust treatment, ever.

Get a Quote – VLX 80 Fixed / Picture Window in Jacksonville

If you’re considering a fixed picture window for a wall that deserves better, let’s get you real numbers. We’ll measure your opening, walk through glass and finish options, and give you a written line-item quote, free of charge. Call (904) 914-3691 or reach out to schedule your on-site measurement with Lightwell Windows Jacksonville, your authorized ViewLux installation partner in Jacksonville, FL.

Written by the team at Lightwell Windows Jacksonville, serving Jacksonville, FL as an authorized ViewLux installation partner.