Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Window Replacement: The Jacksonville Owner’s Guide
We stock and install Mr-Glass compatible replacement windows throughout Jacksonville, with most single-window replacements running between $700 and $1,400 installed depending on size, glass package, and frame condition. The quickest way to get an exact number is to call (904) 914-3691 with your window’s measurements and we’ll give you a written quote before any work starts. You’ll usually know a replacement is overdue when you feel a draft near the frame, see condensation building between the panes, or notice the sash getting harder to open as the summer humidity settles in.
More light in, less worry out. That is what a properly replaced Mr-Glass window should do for your Jacksonville home. Keith Yamada and our crew have been working on these frames long enough to know exactly which parts fail first in this climate, and what it takes to get a window operating like it did the day it was installed.
Which Mr-Glass Models This Applies To
Mr-Glass produces windows in several series lines, and the replacement path differs depending on which one you have. Most Jacksonville homes we visit have either the single-hung or horizontal slider models from the past 10 to 15 years, but we also work on the casement and picture-window lines. The easiest way to identify your series is to look for a small label on the top edge of the sash or the inside of the frame, usually printed with a manufacturing code that starts with the series letter.
One compatibility detail most homeowners never hear about: Mr-Glass frames made before roughly 2012 use a slightly different balance shoe profile than the current production runs. The glass and sash dimensions are the same, but the hardware that holds the sash in the track will not cross-fit. We learned this the hard way on an older home in Avondale, and now we check the frame stamp before ordering anything. If the label is gone, we measure the glass thickness, the frame channel width, and the balance shoe profile directly.
For Mr-Glass units, we always recommend OEM glass and seals where they are still available. The glass thickness and spacer system are matched to the frame’s thermal performance, and a generic aftermarket pane can leave you with a window that looks right but underperforms in Jacksonville’s summer heat. That said, for hardware components like balances and locks, quality aftermarket equivalents from brands we trust often save our clients 15 to 25 percent without any sacrifice in function. We’ll spell out both options and the price difference before you decide.
Styles & brands we work with










Signs Your Mr-Glass Window Replacement Is Failing
- Condensation between the panes that will not wipe away. This means the seal has failed and the insulating gas has escaped. No amount of cleaning fixes it; the glass unit needs replacement.
- A sash that binds, sticks, or drops when you let go. In Mr-Glass frames, this usually points to a worn balance shoe or a broken coil spring inside the balance. On Jacksonville’s older riverfront homes, we also see salt-air corrosion eating at the metal channel.
- Visible daylight or felt air movement around the sash when closed. The weatherstripping has compressed or the frame has settled out of square. This is the most common cause of spiking AC bills in summer.
- Fogging that comes and goes with temperature changes. That is a slow seal leak, not a broken seal. It will get worse, and waiting too long can let moisture reach the frame and start rot on wood or corrosion on aluminum.
- The lock no longer catches or requires real force to engage. The keeper and latch have worn, or the sash has shifted enough that the alignment is off. Forcing it just bends the hardware further.
Replacement Cost & What’s Included
Most Mr-Glass window replacements in Jacksonville run from $700 to $1,400 per opening installed, with the range driven by three things: glass package, frame material, and whether it is a glass-only replacement or a full sash swap. A simple seal-failed glass replacement on a vinyl single-hung sits at the lower end. A full sash replacement with low-E impact glass, new balances, and new weatherstripping lands at the higher end.
Every quote we give is a written, line-item price before any work starts. You will see the cost of parts, the cost of labor, and exactly what we’re doing to your window. No estimate-then-surprise at the end. Every replacement we install carries the Lightwell 365-Day Done Right Promise: if the finished work is not right, we make it right, no debate. And every visit includes shoe covers, drop cloths where we’re working, and a photo of the clean-up before the crew leaves, so you know exactly what your floors looked like when we walked out.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Removing a sash and replacing glass may look approachable on a video, but Mr-Glass frames use tensioned balances that can release suddenly. If the balance shoe gives way while the sash is out, fingers and hands are in the line of travel. We have also rescued more than one Jacksonville homeowner who removed a sash, could not get the new glass to seat, and then had a plywood-covered window through a rainstorm. If the problem is a loose screw on a handle or a bit of debris in the track, clean it out and tighten it yourself. If glass, seals, or balances are involved, call (904) 914-3691. The estimate is free, and we will tell you honestly whether it is a quick fix or a full replacement.
FAQs
In Jacksonville’s heat and humidity, most Mr-Glass windows hold up for 15 to 20 years before the seals begin to fail, though units on western-facing walls or near the Intracoastal and St. Johns River often show seal failure inside of 10 years. The salt air and intense UV exposure accelerate the gas loss. If your windows are in that window of age and you are seeing fog, a glass replacement usually makes more sense than continuing to patch. Call (904) 914-3691 and we’ll assess what’s failing and what’s still sound.
If the issue is weatherstripping, a lock, or a balance, yes, those components can be repaired individually. If the glass unit itself has lost its seal and fogged, there is no repair that restores it; the insulated glass unit has to be replaced. We will always tell you which category your problem falls into before quoting anything.
A single-window glass or sash replacement usually takes 1 to 2 hours on site once parts are in hand. If we are replacing multiple windows on the same visit, most jobs finish the same day. We schedule around your household’s rhythm, and we keep tools quiet during nap hours if you have young kids at home.
For the most common Mr-Glass balance shoes, locks, and weatherstripping profiles, yes, our trucks carry them as standard inventory. Glass units are cut and assembled to the exact measurements of your frame, so those are ordered after we confirm the specs, typically arriving in 3 to 7 business days across Jacksonville. We also stock compatible hardware for PGT, CGI, and CWS frames since many Jacksonville homes have a mix.
Schedule Your Free Estimate
If you have a Mr-Glass window that is fogging, binding, or leaking air, call Lightwell Windows Jacksonville at (904) 914-3691. We’ll ask a few questions about what you’re seeing, look up your window specs if you have the label handy, and schedule a walkthrough at a time that works for your family. Written quote before any work begins. Floors covered. Clean-up photographed. We look forward to earning your trust.
Written by Keith Yamada, Owner, Lightwell Windows Jacksonville at Lightwell Windows Jacksonville, serving Jacksonville and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.