Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Door Installation: The Jacksonville Owner’s Guide
PGT door installation in Jacksonville typically runs between $850 and $2,400 for a complete replacement install, depending on the door style, frame condition, and hardware involved. Most PGT door swaps we handle in Jacksonville are completed in a single day once the door is on hand. Homeowners usually discover they need this work when a sliding door starts dragging, a hinged door won’t latch cleanly, or the frame shows signs of water intrusion after one of our heavy afternoon thunderstorms.
If you’re reading this, chances are you’ve already spotted the warning sign: a sticky track, a sagging hinge, daylight peeking through the weatherstripping. You want the PGT product you paid for to keep doing its job, and you want the replacement handled without turning your entryway into a construction zone. That’s exactly the job we take on.
Key Takeaways:
- PGT door installation in Jacksonville usually runs $850 – $2,400 installed, depending on door type and frame condition.
- We install and service PGT hinged patio doors, sliding glass doors, and entry door systems.
- Every job gets a written price before work starts, no exceptions.
- Our crew leaves the site with a photo of the cleanup before we go.
Which PGT Models This Applies To
PGT builds a wide range of door styles, and the installation approach changes with each one. We work on PGT sliding glass doors (the SGD series, including the 570 and 770 lines), PGT hinged patio doors (the 660 and 760 series), and PGT entry door systems with multi-point locking hardware. The most common PGT doors we install in Jacksonville homes are the WinGuard and SpectraGuard hurricane-rated lines, which are heavy units that need careful frame prep and shimming to sit square.
Here’s the compatibility detail that matters: PGT doors manufactured after roughly 2015 use a different sill profile than older units, so you can’t always drop a new panel into an existing frame. If your door was installed before that, we usually recommend a full frame replacement rather than a panel swap. The model number is printed on a label on the door’s edge or top rail when the panel is fully open. Keith Yamada has spent years matching PGT door installations to the right opening dimensions here in Jacksonville, and the first thing he’ll tell you is that a tape measure and a look at that label answer most questions before any money changes hands.
One more thing worth knowing: Lightwell Windows Jacksonville is an independent service provider, not affiliated with PGT. We install and service their doors because the product line is strong, but we’ll also tell you honestly when a CGI or CWS door is the better fit for a particular opening.
Styles & brands we work with
Signs Your PGT Door Installation Is Failing
A failing PGT door doesn’t usually fail silently. Here’s what Jacksonville homeowners notice first, and what’s actually happening behind the symptom:
- The door drags or sticks when you slide it. Roller assemblies wear down over time, especially in homes near the Intracoastal where fine sand and salt air accelerate the grit buildup. A dragging PGT slider is nearly always a roller or track problem, not a frame problem.
- You see daylight around the edges when the door is closed. Weatherstripping compresses with age and UV exposure, and Florida sun is brutal on rubber. Your PGT door was designed to seal tight for hurricane performance. When it doesn’t, air and water follow.
- The multi-point lock won’t engage smoothly. PGT entry doors use a three-point locking system that depends on precise alignment. A door that’s drifted even an eighth of an inch out of square will fight you at the handle.
- Water stains appear at the sill or baseboard corners. This is the warning sign we take most seriously in Jacksonville. A failed sill pan or worn threshold gasket lets rainwater in during our summer downpours, and by the time you see the stain, the subfloor may already be involved.
- The door feels heavier than it used to. On PGT WinGuard doors especially, the laminated impact glass is heavy by design. When the operation feels notably harder than a year ago, it’s usually the rollers or hinges carrying more load than they should, which accelerates every other wear point.
Replacement Cost & What’s Included
PGT door installation in Jacksonville falls into fairly predictable pricing bands once we know what’s being replaced. A standard PGT sliding glass door installation runs roughly $850 to $1,600 including labor and the new door. A PGT hinged patio door with a full frame replacement lands between $1,200 and $2,000. A PGT entry door system with multi-point hardware typically runs $1,800 to $2,400 installed.
| PGT Door Type | Typical Installed Cost in Jacksonville |
|---|---|
| Sliding glass door (standard SGD) | $850 – $1,600 |
| Hinged patio door (660/760 series) | $1,200 – $2,000 |
| Entry door with multi-point lock | $1,800 – $2,400 |
What shifts the number within those ranges? Frame condition is the big one. If the rough opening is square and the flashing is intact, we’re looking at a clean swap. If there’s hidden rot from years of Jacksonville humidity or a previous sloppy install, the scope grows. The price we quote covers the door, all installation labor, hardware adjustment, haul-away of the old unit, and a workmanship warranty on the install. Every quote is a written line-item price before any work starts. No invoice surprise at the end.
Call (904) 914-3691 for an exact quote on your PGT door installation. Estimates are free, and we’ll come out to measure before we ever put a number in front of you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Honest answer: some PGT door issues are safe to investigate on your own. Cleaning a track, checking for loose screws on the handle, and adjusting a striker plate are all reasonable weekend tasks. But a full PGT door installation is not a DIY project, and here’s why. These are heavy units. A PGT WinGuard slider can weigh well over 200 pounds. A hinged patio door out of square will bind, leak, and void the manufacturer’s warranty if the frame isn’t set correctly. And the multi-point locking systems on PGT entry doors require shimming precision that’s genuinely hard to get right without the right training and tools.
The dangerous part isn’t dramatic, it’s just real: a mishandled heavy door can hurt you or damage the opening, and that damage costs more than the install ever would have. If you’re unsure whether your PGT door needs a repair or a full replacement installation, call (904) 914-3691 and describe what you’re seeing. We’ll tell you straight up what we’d do if it were our house.
FAQs
Most PGT door installations are a one-day job. We arrive in the morning, remove the old door, set the new one, adjust the hardware, and clean up before we leave. Hurricane-rated PGT doors sometimes take a bit longer because the laminated glass units are heavier and require more careful handling, but we’ll give you a clear timeline in writing before we start.
Often, yes. Worn rollers, damaged weatherstripping, and misaligned locks are all repairable on many PGT models. The question is whether the repair makes financial sense against the door’s remaining lifespan, and we’ll lay out both numbers so you can decide with the price in writing either way. Call (904) 914-3691 and we’ll take a look.
We can often source standard-size PGT sliding doors quickly through our supplier network, but custom or hurricane-rated sizes are ordered per job. We’ll confirm lead time before you sign anything. We also stock parts and can match alternatives from CGI, CWS, or ES Windows when the situation calls for it.
No. The price we quote is the price you pay. If we find hidden frame damage when we open the wall, we’ll stop, show you what we found, and get your approval on any added scope in writing before touching it. That’s the rule, not the exception.
Call Lightwell Windows Jacksonville for Your PGT Door Installation
A light well is what brings daylight deep into a building, and that’s what a well-installed PGT door should do for your Jacksonville home: more light in, less worry out. If your PGT door is dragging, leaking, or fighting you at the lock, don’t let it ride through another Florida summer. Call (904) 914-3691 today and we’ll schedule a free estimate, measure the opening, and give you a written price before any work starts. Shoe covers on the floors, drop cloths where we work, and a clean site before we leave. That’s the Lightwell way, and it’s how we’ve done it since 2010.
Written by Keith Yamada, Owner, Lightwell Windows Jacksonville at Lightwell Windows Jacksonville, serving Jacksonville and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.